| || |
King KT-70 Mode S Transponder
|Model||King KT-70 Mode S Transponder|
|Part Number||P/N: 066-01141-0101 - Standard KT-70 (most common)|
P/N: 066-01141-0201 - Silver Crown Plus version
P/N: 066-01141-1101 - 5 volt lighting and without faceplate (CNI-5000 version)
|Voltage||14 or 28 volts|
|Included||Rack, Connector, Mode S Programming Module (if needed), 90 Day Warranty|
|Comments||The KT-70 offers Mode S operation, but it does not support TIS traffic. The King KT-73 is required for TIS.
According to the United Kingdom's CAA, the KT-70 does not meet European Mode S requirements.
The KT-70 is a technological step up from the popular KT-76 series of transponders. Unlike these Mode C transponders, the KT-70 is also capable of Mode S operation. In fact, the KT-70 was the first panel mounted Mode S transponder.
Mode S stands for "selective", and it is helpful for both the pilot and controllers. A Mode S transponder is uniquely identified, and can send this identity data. This allows the ATCRBS system to call a transponder individually (selectively), reducing bandwidth needs in crowded airspace. Mode S transponders are not yet required, but like Mode C in the past, that day is coming.
With 250 watts of transmission power, the KT-70 offers long range and operation at any altitude. It also takes the same amount of panel space as a KT-76 series transponder, permitting upgrades without moving other radios. (The KT-70 is a new installation, but you won't have to make space for it.)
The KT-70 features:
You may also be interested in an Encoder to use with this KT-70. This is required for Mode S (or Mode C) operation.
- Self-dimming gas discharge display
- Displays the ATCRBS code and encoded altitude transmitted
- Push button selection of VFR code (1200)
- 250 watts of power
- Supports a remote ident button
- System self-test function
If you have any questions about this item, please click to send us an email.
Click an image below to enlarge
Bennett Avionics: Quality Used Avionics, Professional Service